Replacement Double Glazing Window Handles
When a double-glazed window handle is damaged, it's essential to replace it to ensure safety and function.
uPVC handles are operated by a spinning wheel that runs through the middle of the handle to the lock mechanism within the window frame.
You'll have to know the step height of your uPVC handle. This is determined by looking for screw cap caps on the inside face of the handle.
Tilt & Turn
Tilt and turn windows are a popular option in Europe however they have only recently started to gain popularity here in the UK. The advanced function of these windows makes them a fantastic option for new constructions and renovation projects. They are simple to open and close, allowing ventilation and light into your home.
They also have greater airtightness compared to other window types because of the locking points on the sash and the rubber seal running around the entire length of the frame. Unlike uPVC Casement Windows that tilt and turn windows can be opened both from the top and bottom. This lets you clean your windows from the outside while sitting in the at-home comforts of your home.
It is essential to take into consideration the step height when replacing a tilt-and-turn window handle. This is the distance from the bottom of the handle to the point where it is fixed to the frame of the window. It is crucial to get this right because if it isn't done, your window won't be able to open properly.
The standard step height for an UPVC or aluminum tilt and turn window is 21mm. Make sure that the handle you choose comes with this same step height so that it will fit your window.
Another factor to bear in mind when selecting a tilt and turn replacement window handle is the kind of operation it has. Some handles come with a lever that is down when locked and then up at 90 degrees to tilt, and straight up to open. This is known as a "tilt before turn" (TBT) safe handle and you should always use this when children are about in your home.
The majority of tilt and turn windows have a spindle on the handle's back that can be adjusted to various positions, similar to the door lock. The length of the spindle also varies. Some have a larger spindle and it is adjustable by using a screwdriver to move the shaft up or down. Others have a smaller spindle that is adjustable by loosing one screw at the handle base.
Casement
The casement window is one of the most well-liked type of double-glazed window due to a variety of reasons. It is simple to install and offers outstanding energy efficiency and noise reduction. There are a few common problems with these windows. Homeowners should be aware. If the handle of your casement is damaged, you may find it difficult to open the windows.
Fortunately, there are easy steps you can take to change your window handle and make it work again. No matter if your casement windows are old or new you can follow these steps to ensure that your home is safe and secure.
If your uPVC casement window has been damaged it is crucial to fix it as quickly as possible. This will help keep your home secure and deter burglars. You can pick from a variety of window handles, which include cockspur handles and espag handles. It is essential to choose a handle that fits your window. If you have difficulty opening your windows, it could be due to the spindle in the handle is worn out.
When replacing your uPVC casement window handles, there are a few points to consider. Included in this are the handle's size along with the screw centres and spindle size. Consider the lock type, as well as the colour. The type of handle you use will determine the locking mechanism of your window.
Today's uPVC windows have Espag handles. These handles control the espagnolette multipoint locks on your uPVC windows. They are available in a variety of colours and are available in non-locking or locking versions. They are also available in left and right opening versions.
Cockspur handles can still be found on older uPVC double-glazed windows but are not used anymore. The aluminium counterpart has a lower step height. They typically measure 21mm, whereas the aluminium version is 9mm.
You could also use blade or spade handles to replace handles for double-glazed windows. These handles are similar in design to cockspur handles, but they have a shorter spindle. They are usually found on older wooden frame double-glazed windows, but they can be seen on uPVC cottage windows.
Sash
If you have an old sash window, you may need to replace the handles. This is because these windows come with a system comprising the counterweights, sash cords, pulleys and rails. These components allow the sash window to be moved easily up and down. The sash's movement blocks moisture from entering the frame, causing mould and wood rot. It also permits you to open the windows to let in fresh oxygen.
You'll have to measure the spindle of your sash windows in order to determine the correct handle. You can find this by measuring the distance between the base of the handle and the frame. You'll also need to consider whether the window is positioned, i.e. whether the handle opens anti-clockwise (right-handed) or clockwise (left-handed).
Once you've found the right sash handle for your window, you'll have to determine if it requires a tilt latch. A tilt latch helps to keep the window in a straight position, and is fitted to both single or double glazed windows. They are available in three varieties that include internal tilt latches, slide-in tilt latches and tilt latches that are mounted on the surface.
To increase your security, you can also have a sash lock fitted to the window sash. This will secure the window's opening and prevent it from being forced open by intruders.
There are many styles of sash handle to choose from. Espag handles are the most popular for uPVC Windows. They are usually slim and round, with a locking mechanism. There are also monkey tail and cockspur handles. These are often more suited to heritage windows and provide an attractive appearance however they can be utilized on modern casement windows as well.
Vertical Sliding
While horizontal sliding windows are a favorite choice for large window openings vertical windows are great for smaller spaces. They are easy to clean and offer excellent airflow. They also cost less since they don't require any maintenance. They are susceptible to damage when you accidentally drag the windows. It is important to place these windows in a spot where pets and children are not able to access them.
Vertical sliding windows can be opened by moving left or right within a single frame. The balance of the spiral is typically made of a metal strip that is protruding from the window on one side, and turned into a coiled shape. When the window is lowered it is lowered until the hidden end of the spiral turns and allows the sash to rise and closed.
The most popular type of vertical sliding windows is made of real timber and gives your home a classic appearance. However, if you prefer an elegant style, there are a lot of PVC-U alternatives that come in a variety of finishes and colours to suit your style. Some manufacturers even provide woodgrain effects to give an authentic look.
Vertical sliding windows are easier to open than double-hung windows in certain situations. They are also less vulnerable to moisture damage than wooden windows, making them a great option for homes with seniors or children.
Certain homeowners put security features to their sliding windows to keep unwanted guests away from the home. To accomplish this, you need to wedge a scrap piece of wood into the lower sash. You can then tack it onto the frame to keep it from being opened fully. If door handle repairs Repair My Windows And Doors want a more sophisticated solution you could consider adding a keyed sliding-bolt lock to the frame. This will ensure that your windows are secure, and your family will be able gain access to them in case of emergency.